These pressure sensor controlled, multi-outlet water pressure pumps, with variable speed drive, serve 1-5 outlets. Motor speed is electronically controlled to maintain steady flow and constant pressure. Amp draw reduces as flow reduces to conserve energy, ranging from less than 1 amp to a maximum of 10 amps. Connectors for 1/2” (13mm) ID hose or 1/2” Qest threads.
Variable Speed Control
Unique constant water pressure - NO pressure switch.
Solid State Pressure Sensor
Electronically controlled variable flow.
Controls Pressure by Changing Motor Speed
Gives constant flow and hot water mix.
Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
Speeds Up As Demand Increases
Eliminates accumulator tank.
True sensors regulated water pressure.
Nearly Silent Operation/No Cycling
Up to 4.5 gpm (17 lpm) output.
Self-priming up to 10ft (3m)/Runs Dry
Runs silently under normal use.
Automatically adjusts to 12 Volt or 24 Volt dc power input.
Conserves battery power - uses lower amps at lower flow.